Price: EUR 45,99
(as of Jul 30,2021 10:38:50 UTC – Details)
1)5.0″ TFT LCD Module, Resolution 800×400, SSD1963 Controller
2)LCD Type: TFT Transmissive Normal White super wide viewing angle
3)LCD Panel: HannStar HSD050IDW1
4)Interface: 8/16bit parallel bus interface
5)PCB Color: Blue
6)On board DC-DC Boost regulator TPS61040 to provide power supply to LCD backlight
7)Standard 2×20 2.54mm pin header for connection to MCU/development board
5inch HDMI LCD x 1
HDMI adaptor x 1
Touch pen x 1
RPi screws pack (4pcs) x 1
Tips for driver:
After install the driver that could get the touch function work.
1.)Step1, Install Raspbian official mirror
a)Download Raspbian official mirror（latest version）: https://www.raspberrypi.org/downloads/
b)Use”SDFormatter.exe”to Format your TF Card
c)Use”Win32DiskImager.exe” Burning mirror to TF Card
2.) Step2, Clone my repo onto your pi
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
3.)Step3, According to your LCD’s type, excute:
In case of 5″ LCD
If you need to switch back to the traditional HDMI display
Wait a few minutes,the system will restart automatically, enjoy with your LCD
Note: This method will be available only when your Rapspian connects with WIFI.
If you do not have Wifi when you use it, you need to add drivers by yourself, you can contact us for tutorials or you can use the tutorials in CD directly.
❤5 inch resistive touch screen designed for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+, can’t work for Raspberry Pi Zero board.
❤The Module used SSD1963 LCD controller with 5 inch LCD module with touchpad. Job stability of the module with super anti-jamming capability,far beyond driven solutions on the market SSD1963 , SSD1963 interference poor, black and white with crash risk .
❤This LCD has a superior display quality and super wide viewing angle,it using 8080 timing sequence with 16bit parallel bus interface, resolution 800 × 480, 16M colours display panel.
❤The LCD has a USB port, SPI flash footprint. It’s pinout is pin to pin compatible with TFT Shield for arduino MEGA 2560.The TFT LCD Module has embedded Font IC, which contain fonts of 10 sizes and 236 icons.With this LCD module, you will be able to draw bigger and nicer fonts, and also extended ASCII characters too.
❤For Raspberry Pi user, 5″ inch TFT LCD Display Module is compatible with Raspberry Pi 3 2 Model B RPi 1 B B+ A A+ ,Detailed tutorials including project introduction and drives CAN BE PROVIDED FOR FREE,contact us BY Email to get documents